If you love the freedom when you are exploring a remote trail on your dirt bike, then you will want to make the most out of your hobby. You may have bought a standard dirt bike and are getting used to the new machine, but you may need to upgrade certain parts if you are going to ensure reliability and performance. Why do you need to look more closely at the cooling system to start off with?
On a typical dirt bike, water is pumped around the cylinder to gather heat and transfer it to a separate radiator. It's a similar system to a car in many respects and will rely on the forward motion in order to cool the water sufficiently.
Avoiding the Overheat
Yet there is often room for improvement here, and you should take a much closer look at the components involved. If you intend to spend a lot of time navigating some tricky and tortuous trails, you will need to make sure that the bike does not overheat and leave you stranded.
Upgrading Your Hoses
Begin by looking at the hoses that connect the system together. While these are made from reinforced rubber and will handle the job, you may benefit from upgrading to a silicon product instead. Often, these have a larger internal diameter, and the hoses themselves are of better quality. The individual bends will have been formed using more sophisticated machinery, and they will typically come with stainless clips as well. Water will now be able to flow more effectively through the system, and each hose will be better able to deal with temperature, pressure and rough terrain.
Fitting a Fan
If you open the bonnet on your car or truck, you will see a fan in front of the radiator. This is designed to keep things cool when the vehicle is stopped at a traffic light while the hot engine is still running. Most dirt bikes do not come with a fan as standard, but you should look at fitting one in any case. It is particularly important if you do spend long periods of time moving slowly through a muddy or rutted section, as you cannot build up any flow of air. The fan will then come on and will help to cool down the fluid until you can get moving again and restore normal service.
These are just some of the parts available to upgrade your dirt bike and help you to keep things cool in the toughest of situations.
If you have additional questions, reach out to an auto dealer that offers products like Honda motorcycles.